Friday, November 11, 2016

Posted by Unknown |
How to Remove Bubbles When Laminating a Picture

Laminating protects your pictures from dust and scratches. Getting a smoothly laminated surface can be a challenge, but there are techniques you can use to remove bubbles while laminating. Bubbles can be caused by numerous factors, such as lack of tension in the laminate, movement of the photo while laminating or moving too quickly.

Instructions

    1

    Cut out the image that you intend to laminate or, if the picture is a professional print, trim the edges so that they are even and any undesired border is removed. Cut out a sheet of laminating plastic slightly larger than the picture.

    2

    Peel back the protective paper from the top inch of the laminating paper and attach the exposed laminate to the edge of a glass tabletop. A glossy wood tabletop also works. Slack in the laminating plastic will cause bubbles. Attaching it to a hard surface allows you to hold the plastic taut while pressing it over the picture.

    3

    Lay the photo onto the tabletop next to the edge of the laminate, with the laminate pulled up and away from the image. Make sure the image is precisely lined up with the laminate, because you will not be able to adjust the image once the laminate has come in contact with any part of the photo.

    4

    Peel back the paper backing another inch and slowly lay it over the bottom of the photo, smoothing it with a soft cloth as you go. Smooth the laminate going away from the edge of the table so that bubbles are pushed out into the area that hasnt yet been laminated. Maintain tension on the laminate as you go and smooth out any bubbles as they form. Stubborn bubbles can be smoothed out using the edge of a credit card or drivers license.

    5

    Continue peeling away the backing, laying the laminate over the photo and smoothing it out, going about an inch at a time, until you have reached the top of the photo. Press out any remaining bubbles with the cloth, and press the edge of remaining laminate down.

    6

    Trim the edges of the laminate away from the photo using a sharp utility knife. Repeat the process on the back of the photo if desired.


How to Remove Bubbles When Laminating a Picture

Laminating protects your pictures from dust and scratches. Getting a smoothly laminated surface can be a challenge, but there are techniques you can use to remove bubbles while laminating. Bubbles can be caused by numerous factors, such as lack of tension in the laminate, movement of the photo while laminating or moving too quickly.

Instructions

    1

    Cut out the image that you intend to laminate or, if the picture is a professional print, trim the edges so that they are even and any undesired border is removed. Cut out a sheet of laminating plastic slightly larger than the picture.

    2

    Peel back the protective paper from the top inch of the laminating paper and attach the exposed laminate to the edge of a glass tabletop. A glossy wood tabletop also works. Slack in the laminating plastic will cause bubbles. Attaching it to a hard surface allows you to hold the plastic taut while pressing it over the picture.

    3

    Lay the photo onto the tabletop next to the edge of the laminate, with the laminate pulled up and away from the image. Make sure the image is precisely lined up with the laminate, because you will not be able to adjust the image once the laminate has come in contact with any part of the photo.

    4

    Peel back the paper backing another inch and slowly lay it over the bottom of the photo, smoothing it with a soft cloth as you go. Smooth the laminate going away from the edge of the table so that bubbles are pushed out into the area that hasnt yet been laminated. Maintain tension on the laminate as you go and smooth out any bubbles as they form. Stubborn bubbles can be smoothed out using the edge of a credit card or drivers license.

    5

    Continue peeling away the backing, laying the laminate over the photo and smoothing it out, going about an inch at a time, until you have reached the top of the photo. Press out any remaining bubbles with the cloth, and press the edge of remaining laminate down.

    6

    Trim the edges of the laminate away from the photo using a sharp utility knife. Repeat the process on the back of the photo if desired.



  • How to Fix Bubbles in Laminate Flooring eHow

    www.ehow.com Home Repair & Maintenance Floor Repairs

    Laminate provides a durable flooring solution for any room, giving a homeowner an inexpensive alternative to traditional stone, ceramic or hardwood floors, while ...


  • How to Install Laminate Flooring : How-To : DIY Network

    www.diynetwork.com/how-to/how-to-install-laminate-flooring

    DIY Network explains how to easily install snap-together laminate floors to give a room a beautiful new look.


  • How To Install Laminate Flooring - Carpet and Flooring guide ...

    www.wfca.org/Pages/How-To-Install-Laminate-Flooring.aspx

    How-to guide for installing laminate flooring by the World Floor Covering Assoication


  • How to Remove wallpaper like a pro Interior Design

    interior-design.wonderhowto.com/how-to/remove-wallpaper-like-pro...

    This how-to instructional video show you how to remove wallpapers like a pro, fast and easy! You won't need a steamer in order to do this easy job! Once you get the ...


  • How to Install a Laminate Countertop : How-To : DIY Network

    www.diynetwork.com/how-to/how-to-install-a-laminate-countertop

    DIY home improvement experts show how to replace an old countertop with a new laminate countertop in just a few simple step-by-step instructions.


  • Laminate Flooring Installation How to Install DIY by ...

    www.findanyfloor.com/InstallationGuides/InstallingLaminateFlooring...

    Flooring Installation Installing laminate flooring for the first time? Experienced DIY'er? Use our professionally written guides to help make installation quick and ...


  • How to Remove stubborn wallpaper Interior Design

    interior-design.wonderhowto.com/how-to/remove-stubborn-wallpaper...

    Did you paint over your wallpaper? Bad decision. Well if you need to remove the wallpaper you will have to spray it. Or try steaming it and then scraping. Remove ...


  • How To Use GBC Self Seal Laminating Sheets - YouTube

    www.youtube.com/watch?v=Hw0lPK4SJJ8

    http://www.MyBinding.com brings you this demonstration of How to use GBC Self-Seal Laminating Sheets. These are great for laminating on the go or for ...


  • How to Decoupage With Mod Podge (without bubbles and

    www.youtube.com/watch?v=EGNsRu_3KLI

    I finally learned how to decoupage paper using Mod Podge WITHOUT the paper bubbling and wrinkling. This is the process I use to get a perfectly smooth ...


  • How to Remove Laminate Countertops eHow

    www.ehow.com Home & Garden Building & Remodeling Kitchens

    Removing laminate countertops is an easy job that can usually be accomplished in one afternoon. You'll find that removing countertops is a job best suited for at ...

0 comments:

Post a Comment