Thursday, January 30, 2014

Posted by Unknown |
How to Make a Homemade Full Spectrum Light Box

Light boxes work well for photographing small to medium size items, especially when you need a detailed shot for selling online. A full spectrum light box is ideal for creating wam, well-lit photographs that look professional even before editing them on the computer. Instead of spending money on a professional light box and full spectrum lamp, create your own light box out of cheap materials and a full spectrum light bulb. Not only will you save money, but you'll still achieve high-quality results.

Instructions

    1

    Create several light boxes if you want to photograph different sized objects, or make one large box and move closer for smaller shots. Decide on the size for the interior of your light box. For larger objects you'll want a larger size and vice versa for smaller objects.

    2

    Find a cardboard box sized as closely as possible to the size you need. If you cannot find the right size box, or want a more elegant looking box, Studio Lighting.net suggests purchasing thick pieces of white foam board to use instead.

    3

    Cut off the flaps of the cardboard box and turn it on its side with the opening facing you. This is now the front of your light box. Cut off the top of the box as well using a utility knife. On a piece of poster board, measure and cut out a square to use for a template in cutting the remaining three sides of your box. The square should leave an inch of the cardboard left on all sides when placed in the center of one side of the box. Trace the square on the left, right and back sides of the box, then cut the squares out by lining up the metal ruler with the line you want to cut and running the utility knife alongside it. This creates a straight cut and keeps the knife from slipping sideways.

    4

    Measure and cut out four squares from the foam board if you prefer to build your light box instead of using a cardboard box. Tape or hot glue the squares together to form a box with the front side and the top open. Add a fifth foam board to the top if you want to shine a light in from the front of the box instead of down from the top.

    5

    Place a piece of white Bristol board in the back of the cardboard light box. Skip this step for the foam board box. Tape the Bristol board to the top and let it curve down to the bottom of the box. Tape the bottom edge in place. It should create a nice, smooth curve at the bottom. Do not crease it or press it flat as this curve will reflect light and create a smooth backdrop for your photographs with no visible lines.

    6

    Tape a piece of tracing paper over the top of the light box unless you plan to shine light in through the front. This will diffuse the light and keep it from creating a bright spot in one area and shadows in the rest of the box. If you find the tracing paper is too thin, try a thicker, yet still slightly transparent paper such as vellum or regular paper. Jefferey Bail, on Digital Photography School.com, suggests covering the box with a white piece of cloth.

    7

    Place the box in an area of natural light, if possible, and insert a full spectrum light bulb, such as an OTT light bulb, into an adjustable desk lamp. Move the lamp so it shines light in through the front or down through the top of your box and turn it on. Adjust the settings on your camera for the best picture quality depending on how bright the light is, and use photo editing software to make any final adjustments or touch ups after taking your photographs.


How to Make a Homemade Full Spectrum Light Box

Light boxes work well for photographing small to medium size items, especially when you need a detailed shot for selling online. A full spectrum light box is ideal for creating wam, well-lit photographs that look professional even before editing them on the computer. Instead of spending money on a professional light box and full spectrum lamp, create your own light box out of cheap materials and a full spectrum light bulb. Not only will you save money, but you'll still achieve high-quality results.

Instructions

    1

    Create several light boxes if you want to photograph different sized objects, or make one large box and move closer for smaller shots. Decide on the size for the interior of your light box. For larger objects you'll want a larger size and vice versa for smaller objects.

    2

    Find a cardboard box sized as closely as possible to the size you need. If you cannot find the right size box, or want a more elegant looking box, Studio Lighting.net suggests purchasing thick pieces of white foam board to use instead.

    3

    Cut off the flaps of the cardboard box and turn it on its side with the opening facing you. This is now the front of your light box. Cut off the top of the box as well using a utility knife. On a piece of poster board, measure and cut out a square to use for a template in cutting the remaining three sides of your box. The square should leave an inch of the cardboard left on all sides when placed in the center of one side of the box. Trace the square on the left, right and back sides of the box, then cut the squares out by lining up the metal ruler with the line you want to cut and running the utility knife alongside it. This creates a straight cut and keeps the knife from slipping sideways.

    4

    Measure and cut out four squares from the foam board if you prefer to build your light box instead of using a cardboard box. Tape or hot glue the squares together to form a box with the front side and the top open. Add a fifth foam board to the top if you want to shine a light in from the front of the box instead of down from the top.

    5

    Place a piece of white Bristol board in the back of the cardboard light box. Skip this step for the foam board box. Tape the Bristol board to the top and let it curve down to the bottom of the box. Tape the bottom edge in place. It should create a nice, smooth curve at the bottom. Do not crease it or press it flat as this curve will reflect light and create a smooth backdrop for your photographs with no visible lines.

    6

    Tape a piece of tracing paper over the top of the light box unless you plan to shine light in through the front. This will diffuse the light and keep it from creating a bright spot in one area and shadows in the rest of the box. If you find the tracing paper is too thin, try a thicker, yet still slightly transparent paper such as vellum or regular paper. Jefferey Bail, on Digital Photography School.com, suggests covering the box with a white piece of cloth.

    7

    Place the box in an area of natural light, if possible, and insert a full spectrum light bulb, such as an OTT light bulb, into an adjustable desk lamp. Move the lamp so it shines light in through the front or down through the top of your box and turn it on. Adjust the settings on your camera for the best picture quality depending on how bright the light is, and use photo editing software to make any final adjustments or touch ups after taking your photographs.



  • How to Make a Tiny Terrarium in a Light Bulb The Hipster Home

    thehipsterho.me/2010/01/how-t

    How to Make a Tiny Terrarium in a Light Bulb January 27, 2010. Inked by april. Ahoy there Hipster Homers! Im Julie and Im the very first guest blogger on this ...


  • How to Make An Inexpensive Light Tent DIY

    www.digital-photography-school.com/how-to-make-a-inexpens

    The following tutorial on constructing an Inexpensive Light Tent was Submitted by Jeffrey Bail over at our Forums. I thought it was well worth highlighting here on ...


  • How to Make a Homemade TV Antenna TV Antenna Plans

    www.tvantennaplans.com

    TV Antennas do not need to be complicated or expensive. There are some simple yet effective homemade TV Antenna designs that can be built at home with parts you


  • Homemade Croutons Recipe, How to Make Croutons Simply

    www.simplyrecipes.com/recipes/how_to_make_croutons

    Make your own homemade croutons, on the stovetop, toasted in butter.


  • MAKE Projects

    makezine.com/projects

    MAKE - DIY projects, how-tos, and inspiration from geeks, makers, and hackers


  • How to Make a Grow Box From A to Z - Marijuana Growing

    www.rollitup.org/grow-room-design-setup/262448-how-make-grow-box-z...

    How to Make a Grow Box From A to Z A closed grow box system will enable you to create and control your own growing environment such as the sun, rain,


  • Special Outdoor Projects - How To Information Page 1 eHow

    www.ehow.com Home & Garden Landscaping & Outdoor Building

    Don't just sit there scratching your head, find useful info on Special Outdoor Projects on eHow. Get essential tips and learn more about everything from How to Build ...


  • Christmas Decorations - How To Information Page 1 eHow

    www.ehow.com Holidays & Celebrations Christmas

    Don't just sit there scratching your head, find useful info on Christmas Decorations on eHow. Get essential tips and learn more about everything from How to Make a ...


  • Light Box / Light Tent Photo Gallery by Bill Huber at pbase.com

    www.pbase.com/wlhuber/light_box_light_tent

    You may want to read thought the comments at the bottom of the page, some different ideas on lights and how to make it. I always use a tripod when using the light ...


  • How to Make a homemade magnetic compass Science

    science.wonderhowto.com/how-to/make-homemade-magnetic-compass-267325

    How to Make Water Freeze into Ice Instantaneously; Makeshift 4th of July Fireworks: How to Light Up 100 Sparklers at the Same Time; How to Make Your Own Homemade


  • Light Therapy Products - Seasonal Affective Disorder

    www.lighttherapyproducts.com

    Sales of dawn simulators, light boxes, and full spectrum Chromalux light bulbs.


  • MAKE Projects and Sensors and Pi Oh-My!

    makezine.com/2013/03/23/projects-and-sensors-and-pi-oh-my

    The projects already submitted to the first ever Raspberry Pi Design Contest not only exhibit the capabilities of the Pi,


  • Homemade Light Box for Product Photography StudioLighting.net

    www.studiolighting.net/homemade-light-box-for-product-photography

    The object of product photography is to show details of an object clearly. Lighting an object well brings out details and provides pleasing highlights. One method for ...


  • "How to make a solar power generator"

    www.rain.org/philfear/how2solar.html

    Easy to make design for a small solar power generator,


  • How to create a fiber optic starfield ceiling

    www.instructables.com/id/How-to-create-a-fiber-optic-starfield-ceiling

    3 Simple Ways to Share What You Make. With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.


  • How to make a LED Flashlight bulb - for 2, 1.5 volt batteries (3 ...

    www.pbase.com/dloftus/led_flashlight_bulb

    Here is how to make a regular flashlight bult into a LED light bulb. I use these red LED bulbs when I do astronomy because red light does not ruin you night vision.

  • Omnomicon makes how to make a rainbow cake!

    www.omnomicon.com/rainb

    Aleta Meadowlark enjoys both omming and nomming. Daily noms are daily. Recipe Round-Robins are monthly. Recipes are often biweekly. So tell me, what can I do for

  • Wonder How To Show & Tell for Creators & Doers

    www.wonderhowto.com

    Improvised Handheld Fireworks: How to Make Homemade Sparklers for the 4th of July. Yesterday 9:37 AM The big fireworks day is almost here, but most of ...

  • Grow Marijuana, Growing Weed Indoors and Outdoors

    howtogrowmarijuana.comMarijuana Growing Tips Grow Weed Indoors Grow Lights

    How to grow marijuana indoors and outdoors - A step by step guide on growing marijuana, cannabis or weed.

  • How to Make Excellent Liposomal Vitamin C Homemade

    blog.bestzapper.com/2012/02/how-to-make-liposomal-vitamin-c-homemade

    NEW! Turbocharged Vitamin CA year ago a farmer in New Zealand was dying of swine flu (and later, leukemia). His family insisted on vitamin C infusions by IV, but the ...

  • How to Make a Fiberglass Subwoofer Box

    www.instructables.com/id/How-to-Make-a-Fiberglass-Subwoofer-Box

    3 Simple Ways to Share What You Make. With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.

  • Daily Gun Pictures: Instructions: How to Make a Homemade Pipe

    dailygunpictures.blogspot.com/2009/01/instructions-how-to-make...

    Jan 20, 2009 This BLOG will now picture Firearms and Weapons from around the world along with related items for Hunting, Camping, Military, and 2nd Amendment Rights.

  • How to Make Yogurt - Step-by-Step Guide with Pictures

    livelonger.hubpages.com Cooking Eggs and Dairy

    I like preparing food at home. It's fun! I like experimenting in the kitchen. I want to save money. I want to make sure my yogurt is all-natural.

0 comments:

Post a Comment