Sunday, April 27, 2014

Posted by Unknown |
How to Make Studio Lights

Studio lights are lights used by photographers in a studio. Most photographers use two or three lights; however, a single photo studio light can provide sufficient lighting. Two of the same kind of lights are often used by photographers as both a key light and fill light.

Instructions

    1

    Buy a 500-watt tungsten or daylight bulb from a photography supply store. You can buy a stronger or weaker bulb, but 500 watts should be plenty for most studios. The bulb should come with a housing. The cost will vary by manufacturer. Make sure the housing has ports on the bottom so that it can be connected to a stand.

    2

    You'll need to buy an adjustable stand for the bulb. Make sure the stand extends to meet the height requirements of the photographer. The stand also should be secure with a wide base so it does not fall over easily. Try to find a stand with an extending arm that swivels; this will allow more flexibility when shooting.

    3

    Consider buying a light box or reflector umbrella. A light box goes over the bulb, and the light from the bulb is diffused through a thin white material, softening the light. A reflector umbrella connects to the bulb housing and reflects the light from the bulb. Neither of these items is necessary and the choice between them is one of preference. Cost is also negligible. Make sure to buy a light box that is compatible with different-model lights or one that has an adjustable base.

    4

    Connect the light bulb housing to the stand. The stand will come with the appropriate connectors, usually a nut/screw and bolt. The bottom of the housing should have the appropriate holes for connectors to come through. Most stands and housing are made to be compatible with a number of models.

    5

    Attach the light box or the reflector. Both cannot be attached at the same time. Each component will have a unique way of connecting based on the manufacturer. Reflectors look like an umbrella and will have a rod that extends from the middle and is normally inserted into the housing of the bulb. All housings should have a place for this. The light box is slightly trickier. It will rest on top of the bulb housing. Adjust the base of the box so that it connects with the housing of the bulb; again this will vary depending on the model. Make sure the housing is not touching the fabric of the light box; this can cause a fire.

    6

    Plug in the light and test it out.


How to Make Studio Lights

Studio lights are lights used by photographers in a studio. Most photographers use two or three lights; however, a single photo studio light can provide sufficient lighting. Two of the same kind of lights are often used by photographers as both a key light and fill light.

Instructions

    1

    Buy a 500-watt tungsten or daylight bulb from a photography supply store. You can buy a stronger or weaker bulb, but 500 watts should be plenty for most studios. The bulb should come with a housing. The cost will vary by manufacturer. Make sure the housing has ports on the bottom so that it can be connected to a stand.

    2

    You'll need to buy an adjustable stand for the bulb. Make sure the stand extends to meet the height requirements of the photographer. The stand also should be secure with a wide base so it does not fall over easily. Try to find a stand with an extending arm that swivels; this will allow more flexibility when shooting.

    3

    Consider buying a light box or reflector umbrella. A light box goes over the bulb, and the light from the bulb is diffused through a thin white material, softening the light. A reflector umbrella connects to the bulb housing and reflects the light from the bulb. Neither of these items is necessary and the choice between them is one of preference. Cost is also negligible. Make sure to buy a light box that is compatible with different-model lights or one that has an adjustable base.

    4

    Connect the light bulb housing to the stand. The stand will come with the appropriate connectors, usually a nut/screw and bolt. The bottom of the housing should have the appropriate holes for connectors to come through. Most stands and housing are made to be compatible with a number of models.

    5

    Attach the light box or the reflector. Both cannot be attached at the same time. Each component will have a unique way of connecting based on the manufacturer. Reflectors look like an umbrella and will have a rod that extends from the middle and is normally inserted into the housing of the bulb. All housings should have a place for this. The light box is slightly trickier. It will rest on top of the bulb housing. Adjust the base of the box so that it connects with the housing of the bulb; again this will vary depending on the model. Make sure the housing is not touching the fabric of the light box; this can cause a fire.

    6

    Plug in the light and test it out.



  • SlightRecoil HOW TO: Make Any Shotgun A Home Defense

    slightrecoil.com/shotguns/how-to-make-any-shotgun-a-home-defense...

    Contrary to what many gun experts would like you to believe, you do not need an expensive, mean looking, black, and tactical shotgun in order to properly ...


  • How to make Agar-Agar Pandan Singapore Food Recipes

    www.singaporelocalfavourites.com/2011/01/how-to-make-agar-agar...

    Agar-Agar Pandan or Coconut milk pandan flavored jelly is easily available at the cake shop or bakery in Singapore. You can see this in almost any 'malay jamuan ...


  • How to Make Rock Candy at Home - Candy Making Homemade

    www.candymakinginfo.com/how-to-make-rock-candy-at-home

    How to make rock candy at home with simple ingredients and supplies you probably already have at home.


  • How to Make Money Fast in Internet - reviewed by Norman Lewis ...

    www.youtube.com/watch?v=ScFvd7Deva0

    Click Here -- http://binarycomplete.com/ -- Click Here How to Make Money Fast in Internet AAlthough there are many websites that claim to show you how to ...


  • Ways to Make Money Fast - How I made $9000 in one week -

    www.youtube.com/watch?v=WI1bB69VSc8

    http://goo.gl/Q2X67 - visit website and start making money Ways To Make Fast Money Online When you decide you want to make money online, you want to do it ...


  • How to Build a Biltong Box How to Make Biltong

    www.biltongbox.info/how-to-build-a-biltong-box

    The first thing you need to do is decide what to use as the box. You could either use wood or cardboard. I have used both in the past. There is no real preference ...


  • Store Location Map Pottery Barn - Home Furnishings, Home

    www.potterybarn.com/customer-service/store-locations.html

    NOTE These maps/directions are informational only. No representation is made or warranty given as to their content, road conditions or route usability or expeditiousness.


  • What It Is and How to Build Up the V or Pelvic Muscle ...

    physicalblue.com/how-to-build-up-the-v-muscle

    This was the very first muscle trouble spot that motivated me towards developing feature focused workouts or any of my specialty workouts for that matter.


  • Techland: How to Reconnect in Samsung Kies PC Studio Mode

    blog.coultard.com/2012/01/how-to-reconnect-in-samsung-kies-pc.html

    Fix for Samsung Kies Reconnect the device in Samsung Kies (PC Studio) mode. Current connection Mode not supported by Kies. The Problem You connect your shiny


  • How To Become A Model - Modeling Portfolios - Fashion,

    www.purestorm.com

    Depending on your budget.... cameras are good and frankly a good entry level camera is a sound investment, but controlling the light is also important so some form of ...

0 comments:

Post a Comment