Sunday, April 6, 2014

Posted by Unknown |
How to Scan Black and White Negatives

Black and white negatives will deteriorate over time. To preserve the images, it is best to scan the negatives and seal them in archival negative sleeves. This preserves the negatives. All the images are then burned to CDs for use later. With the proper preparation, the scanning process will be completed in no time.

Instructions

Preparation

    1

    Determine the file size for scanning the negatives. A good resolution for printing or archiving is 2400 dpi (dots per inch). HP (Hewlett Packard) recommends a Resolution: 75-100 dpi Used for: Sharing via email or posting to the Web. Calculate how much memory will be needed for scanning all the negatives. Make sure to have enough CDs on hand to record all the images. Nothing is worse than running out of CDs in the middle of the project.

    2

    Separate the negatives into types. (i.e. 35 mm negatives, etc.) Each negative type (with flatbed scanners) requires a specific film carrier. Grouping negatives saves time.

    3

    Dust off the negatives with a soft cloth and the canned air. Any dust on the negative will be scanned onto the image and need removing later in the editing process.

    4

    Clean the scanner glass with a specific cleaner made for scanners and computers.

    5

    Put on the cotton gloves. This keeps fingerprints off the negatives and glass.

    6

    Remove the back plate on the scanner. This is necessary to get back light for scanning transparencies. This is for flatbed scanners only. Slide scanners will not need this step.

Scanning

    7

    Place the negative strip into the film carrier and use the canned air to blow off any dust.

    8

    Create a folder on the computer for the scanned images.

    9

    Open the scanner software. Under Original, set the Document Type to Film and the Film Type to Negative. Some software will give a choice between black and white and color. Set the Resolution to the desired size. The Document and Target sizes should be set to original.

    10

    Click the Preview button. This will scan a low-resolution preview image. This allows the photographer to evaluate the image and determine if any edits are needed before scanning the image.

    11

    Open the adjustments panel and set the desired adjustments. All cropping, sharpening and color corrections are made from this panel.

    12

    Click the Scan button. A dialog window will open. Choose the file on the computer for the Destination of the scanned images. Next, name the files and set the file Format. Click OK.

    13

    Repeat the scanning process for all negatives.

    14

    Burn CDs of all the scanned images.


How to Scan Black and White Negatives

Black and white negatives will deteriorate over time. To preserve the images, it is best to scan the negatives and seal them in archival negative sleeves. This preserves the negatives. All the images are then burned to CDs for use later. With the proper preparation, the scanning process will be completed in no time.

Instructions

Preparation

    1

    Determine the file size for scanning the negatives.

    Enhance your photography skill,The Top Secret Photography Techniques

    . A good resolution for printing or archiving is 2400 dpi (dots per inch). HP (Hewlett Packard) recommends a Resolution: 75-100 dpi Used for: Sharing via email or posting to the Web. Calculate how much memory will be needed for scanning all the negatives. Make sure to have enough CDs on hand to record all the images. Nothing is worse than running out of CDs in the middle of the project.

    2

    Separate the negatives into types. (i.e. 35 mm negatives, etc.) Each negative type (with flatbed scanners) requires a specific film carrier. Grouping negatives saves time.

    3

    Dust off the negatives with a soft cloth and the canned air. Any dust on the negative will be scanned onto the image and need removing later in the editing process.

    4

    Clean the scanner glass with a specific cleaner made for scanners and computers.

    5

    Put on the cotton gloves. This keeps fingerprints off the negatives and glass.

    6

    Remove the back plate on the scanner. This is necessary to get back light for scanning transparencies. This is for flatbed scanners only. Slide scanners will not need this step.

Scanning

    7

    Place the negative strip into the film carrier and use the canned air to blow off any dust.

    8

    Create a folder on the computer for the scanned images.

    9

    Open the scanner software. Under Original, set the Document Type to Film and the Film Type to Negative. Some software will give a choice between black and white and color. Set the Resolution to the desired size. The Document and Target sizes should be set to original.

    10

    Click the Preview button. This will scan a low-resolution preview image. This allows the photographer to evaluate the image and determine if any edits are needed before scanning the image.

    11

    Open the adjustments panel and set the desired adjustments. All cropping, sharpening and color corrections are made from this panel.

    12

    Click the Scan button. A dialog window will open. Choose the file on the computer for the Destination of the scanned images. Next, name the files and set the file Format. Click OK.

    13

    Repeat the scanning process for all negatives.

    14

    Burn CDs of all the scanned images.



  • Hair Color & Highlights - How To Information Page 1 eHow

    www.ehow.com Fashion, Style & Personal Care Hair Care

    Don't just sit there scratching your head, find useful info on Hair Color & Highlights on eHow. Get essential tips and learn more about everything from Colored Hair ...


  • Idealab

    www.idealab.com

    Idealab creates ground-breaking companies whose products and services change the way people think, live and work.


  • How to Make Your Own White Castle Sliders at Home Shine

    shine.yahoo.com/shine-food/oen-white-castle-sliders-home-212500859...

    From the blog Shine Food: "Crave on!" exclaimed vice president of White Castle Jamie Richardson as he signed off on an email exchange. We bet you know what craving he ...


  • Graphics Software - How To Information Page 1 eHow

    www.ehow.com Computers Computer Software

    Using Photoscape to add color to black and white images is something that you can do to give the piece a more modern look. Use Photoscape to add color to black and ...


  • Photography - Wikipedia, the free encyclopedia

    en.wikipedia.org/wiki/Photography

    Photography (derived from the Greek photos- for "light" and -graphos for "drawing") is the art, science, and practice of creating durable images by


  • Caucasian race - Wikipedia, the free encyclopedia

    en.wikipedia.org/wiki/Caucasian_race

    Caucasian race (also Caucasoid) is the general physical type of some or all of the populations of Europe, North Africa, the Horn of Africa, Western, Central and South ...


  • How To Do An Egg Cleansing (Limpia) Black People Meet

    destee.com Black Spirituality / Religion - General Discussion

    Peace all, Thought I would post this simple, yet highly effective cleansing procedure. Unless stated, this information is courtsey of Curious Curandera...


  • FSA/OWI B&W Photographs

    memory.loc.gov/ammem/fsahtml/fahome.html

    The black-and-white photographs of the Farm Security Administration-Office of War Information Collection are a landmark in the history of documentary photography. The ...

0 comments:

Post a Comment