Monday, March 31, 2014

Posted by Unknown |
How to Use Tungsten Film

Tungsten film is used for studio photography. The color temperature of average daylight is 5,000 degrees Kelvin. The term "tungsten" refers to a color temperature of 3,200 degrees Kelvin. Therefore, tungsten film is designed to be used under studio lights of the same color temperature, called tungsten lights. If you use tungsten film outdoors instead of under tungsten lights, your photos will have a blue cast. Similarly, if you use a different type of film under tungsten lights, your photos will have a gold cast.

Instructions

    1

    Store your tungsten film in a dark location so it is not damaged by light.

    2

    Open the back of your camera and, while still in a dark location, place the tungsten film into the cylinder hub so it clicks in place and pull the leader of the film until it wraps slightly around the hub on the other end of the camera.

    3

    Close the back of the camera, turn the camera on and listen to the film load. If you do not hear a loading noise, you may have to open the camera and pull the leader a bit farther. Once the film is loaded, turn your camera off until you are ready to use it.

    4

    Situate your subject or props in the area where you plan to take photographs in your studio.

    5

    Set up your three tungsten lights on stands so your subject or props are evenly lit. You may have to move around the lights and raise and lower the stands until you reach the perfect lighting. Use light umbrellas if the lights are too bright for your space.

    6

    Turn on your camera and take photos as you normally would. When your film roll is complete, store it in a dark location and follow Steps 2-3 to reload your camera with another roll.


How to Use Tungsten Film

Tungsten film is used for studio photography. The color temperature of average daylight is 5,000 degrees Kelvin. The term "tungsten" refers to a color temperature of 3,200 degrees Kelvin. Therefore, tungsten film is designed to be used under studio lights of the same color temperature, called tungsten lights. If you use tungsten film outdoors instead of under tungsten lights, your photos will have a blue cast. Similarly, if you use a different type of film under tungsten lights, your photos will have a gold cast.

Instructions

    1

    Store your tungsten film in a dark location so it is not damaged by light.

    2

    Open the back of your camera and, while still in a dark location, place the tungsten film into the cylinder hub so it clicks in place and pull the leader of the film until it wraps slightly around the hub on the other end of the camera.

    3

    Close the back of the camera, turn the camera on and listen to the film load. If you do not hear a loading noise, you may have to open the camera and pull the leader a bit farther. Once the film is loaded, turn your camera off until you are ready to use it.

    4

    Situate your subject or props in the area where you plan to take photographs in your studio.

    5

    Set up your three tungsten lights on stands so your subject or props are evenly lit. You may have to move around the lights and raise and lower the stands until you reach the perfect lighting. Use light umbrellas if the lights are too bright for your space.

    6

    Turn on your camera and take photos as you normally would. When your film roll is complete, store it in a dark location and follow Steps 2-3 to reload your camera with another roll.



  • How to use acrylic gels & mediums: Part 1 (video)

    willkempartschool.com/how-to-use-acrylic-mediums-without-ruining...

    Do you feel you should be using mediums? Youve probably brought a couple and had a play around, but are you using the right ones? Or is the overuse of mediums ...


  • Beetlejuice (1988) - IMDb

    www.imdb.com/title/tt0094721

    Adam and Barbara are a normal couple...who happen to be dead. They have given their precious time to decorate the house and make it their own, but unfortunately a ...


  • Dr. Strangelove or: How I Learned to Stop Worrying and Love the ...

    www.imdb.com/title/tt0057012

    Paranoid Brigadier General Jack D. Ripper of Burpelson Air Force Base, he believing that fluoridation of the American water supply is a Soviet plot to poison the U.S ...


  • Howcast The best how-to videos on the web

    www.howcast.com

    Howcast is the best source for fun, free, and useful how-to videos and guides.


  • Wonder How To Show & Tell for Creators & Doers

    www.wonderhowto.com/following

    Wonder How To is your guide to free how to videos on the Web. Search, Browse and Discover the best how to videos across the web using the largest how to video index ...


  • How the CIA Used a Fake Sci-Fi Flick to Rescue Americans From ...

    www.wired.com/magazine/2007/04/feat_cia

    Apr 24, 2007 November 4, 1979, began like any other day at the US embassy in Tehran. The staff filtered in under gray skies, the marines manned their posts, and the ...


  • How to Charge an iPod using electrolytes and an onion - YouTube

    www.youtube.com/watch?v=GfPJeDssBOM

    In this episode we show you how to charge your iPod (or other mp3 player) for up to 20 minutes using electrolytes derived from Gatorade or Powerade which ...


  • how to be emo - YouTube

    www.youtube.com/watch?v=JGLv3IEL0VI

    mock documentary on how to be emo ... oh really?Emo is one of the most popular genres/style today.so take a look around you for once and see people who ...

0 comments:

Post a Comment