How to Set up Photography Studio Lighting

Studio lighting is both controllable and predictable, but often takes more preparation than working with natural light. It is a combination of where to put lights, how to control them and how much lighting to apply. However, studio lighting is under your full control, and can be adjusted to suit your needs and meet your visual goals. Read on to learn to how place, configure and adjust your studio lighting equipment.

Instructions

1

Position each light. Assemble each lighting rig, which will vary based upon what type of lights you are using. But at a bare minimum there will be a light stand, the light itself and a power source for the light. Add a modifier such as a softbox or umbrella as needed and place the whole assembly in the proper location. Exactly where you place each light will be based upon the look you are trying to achieve and the location of your subject.

2

Setup triggering for each flash. Most, if not all of your lighting will be non-continuous lighting. These types of lights must be synchronized with the camera and will need to be triggered in some way. Most professional studios utilize radio triggers, and to a lesser degree, optical slave units. Slave or provide triggering to each light by wiring an optical slave or radio trigger to it. Once each light has some way of being triggered, test to ensure that all of your flashes are firing consistently.

3

Set the output of each light. Set the output level of each light to achieve the lighting ratios you would like to see in the final image. The values do not have to be perfect as they will be adjusted accordingly after you meter each one.

4

Meter and adjust the key light. Begin by turning on just the main light, also known as the key light. Using an incident-type flash meter, take a reading of the main light where the subject will be. Adjust the output level or location of the key light to obtain the aperture you are looking for.

5

Meter and adjust the fill light. In the same way that you metered and adjusted the key light, adjust your fill light. A good starting point is to set your fill light to be one stop less than your key light.

6

Meter any background or hair lights. If you are using any lights beyond a key and fill light, such as background lights, hair lights, rim lights or separation lights, meter these sources now. Remember to keep any other potential sources of light from affecting your measurement when metering a flash.

7

Take a test shot. Now that all of your lights are in place and adjusted, take a test shot. Preview the image and look for any issues such as blown highlights, underexposure, undesirable shadows and other lighting defects. Adjust your lighting accordingly by once again adjusting output levels and placement of lights until the lighting is technically sound and fulfills your aesthetic aims.

---

Studio lighting is both controllable and predictable, but often takes more preparation than working with natural light. It is a combination of where to put lights, how to control them and how much lighting to apply. However, studio lighting is under your full control, and can be adjusted to suit your needs and meet your visual goals.

Enhance your photography skill,The Top Secret Photography Techniques

. Read on to learn to how place, configure and adjust your studio lighting equipment.

Instructions

1

Position each light. Assemble each lighting rig, which will vary based upon what type of lights you are using. But at a bare minimum there will be a light stand, the light itself and a power source for the light. Add a modifier such as a softbox or umbrella as needed and place the whole assembly in the proper location. Exactly where you place each light will be based upon the look you are trying to achieve and the location of your subject.

2

Setup triggering for each flash. Most, if not all of your lighting will be non-continuous lighting. These types of lights must be synchronized with the camera and will need to be triggered in some way. Most professional studios utilize radio triggers, and to a lesser degree, optical slave units. Slave or provide triggering to each light by wiring an optical slave or radio trigger to it. Once each light has some way of being triggered, test to ensure that all of your flashes are firing consistently.

3

Set the output of each light. Set the output level of each light to achieve the lighting ratios you would like to see in the final image. The values do not have to be perfect as they will be adjusted accordingly after you meter each one.

4

Meter and adjust the key light. Begin by turning on just the main light, also known as the key light. Using an incident-type flash meter, take a reading of the main light where the subject will be. Adjust the output level or location of the key light to obtain the aperture you are looking for.

5

Meter and adjust the fill light. In the same way that you metered and adjusted the key light, adjust your fill light. A good starting point is to set your fill light to be one stop less than your key light.

6

Meter any background or hair lights. If you are using any lights beyond a key and fill light, such as background lights, hair lights, rim lights or separation lights, meter these sources now. Remember to keep any other potential sources of light from affecting your measurement when metering a flash.

7

Take a test shot. Now that all of your lights are in place and adjusted, take a test shot. Preview the image and look for any issues such as blown highlights, underexposure, undesirable shadows and other lighting defects. Adjust your lighting accordingly by once again adjusting output levels and placement of lights until the lighting is technically sound and fulfills your aesthetic aims.

---

• 
  

  CameraSim simulates a digital SLR camera - SLR Photography

  camerasim.com/camera

  The SLR controls: Lighting. Lighting is the single biggest determinant of how your camera needs to be set. With only a few exceptions, you can never have too much light.

• 
  

  Store Location Map Pottery Barn - Home Furnishings, Home

  www.potterybarn.com/customer-service/store-locations.html

  NOTE These maps/directions are informational only. No representation is made or warranty given as to their content, road conditions or route usability or expeditiousness.

• 
  

  Expert photography blogs, tips, techniques, camera reviews ...

  www.adorama.com/alc

  Adorama Learning Center How-to tips, buying guides, tutorials from AdoramaTV, product reviews for better photography, video, and more!

• 
  

  Photoflex Lighting School Photoflex

  www.photoflex.com/pls

  Basic Lighting. A good place to start. These lessons demonstrate professional lighting techniques using only basic lighting tools. Having good lighting equipment is ...

• 
  

  HOW TO MAKE YOUR CHILD A MODEL IN NEW YORK D&G

  www.dgphotostudio.com/modeling/children-modeling

  Children Modeling. What you should know before spending money on children modeling portfolio.

• 
  

  Howcast The best how-to videos on the web

  www.howcast.com

  Howcast is the best source for fun, free, and useful how-to videos and guides.

• 
  

  How To Become A Model - Modeling Portfolios - Fashion,

  www.purestorm.com

  Purestorm aims to help you become a successful model, for all types of modeling including glamour, fashion, photographic, teen and many others. Sign up for a free ...

• 
  

  christian bale rant - YouTube

  www.youtube.com/watch?v=qrvMTv_r8sA

  http://www.youtube.com/tmz Christian Bale's rant on the set of Terminator: Salvation.

• 
  

  Photo Radar Scam - Info on How to Beat Your Photo Radar or

  photoradarscam.com/getout.php

  Defense Strategies, Information to beat Red Light Camera and Photo Radar Cameras Tickets and Citations in Court

• 
  

  Wonder How To Show & Tell for Creators & Doers

  www.wonderhowto.com/following

  Wonder How To is your guide to free how to videos on the Web. Search, Browse and Discover the best how to videos across the web using the largest how to video index ...